Состояние Новый
Счет-фактура Я выставляю счет-фактуру без НДС
Производитель неизвестный производитель
EAN (GTIN) 9313597495045
Код производителя macorGS03550
Количество 99 штук
Features:
UT681 HDMI is a professional tester for testing HDMI cable (HDMI 1.2V/1.3V/1.4V/2.0V).
It can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order.
It supports two test modes, fast scan mode and full display mode.
Three types of HD cables can be tested: a.Both ends are standard HDMI connectors (Type A - Type A); b.Both ends are HDMI Mini connectors (Type C - Type C); c.One end is HDMI connector, one end is HDMI Mini connector (Type A - Type C)
Battery low voltage test, when the battery voltage is lower than about 7.2V, the blue light flashes, prompting to replace the battery.
Auto shut down function, when no operation during the last 10 minutes, the instrument will automatically shut down.
Specifications:
Model: UT681HDMI
Supported Connector: HDMI (type A); HDMI Mini (Type C)
Scan Test Mode: 20 LED (LED1~LED8, LED_G) scan test
Full Display Test Mode: 20 LED (LED1~LED8, LED_G) all light on
Continuity Test: Yes
Short Circuit Test: Yes
Crossover Test: Yes
Network Cable Test: Sheilding/Un-sheilding
Auto Power-off: After 10 minutes without operation
Power Supply: 9V battery
Low Voltage Test: Yes
Operating Temperature: 0
~40
Storage Temperature: -10
~50
Operating Humidity: 20%~80% RH
Storage Humidity: 10%~90% RH
Altitude: Less than 2000 meters
Weight: 175g(approx.)
Package Includes:
1 x Transmitter
1 x Receiver
1.UT681 HDMI to profesjonalny tester do testowania kabla HD (HDMI 1,2 V/1,3 V/1,4 V/2,0 V) 2. Może szybko skanować i testować do 19 przewodów i decydować, który z nich ma zwarcie, rozwarty obwodu lub w niewłaściwej kolejności 3. Obsługuje dwa tryby testowe, tryb szybkiego skanowania i tryb pełnego wyświetlania 4. Test niskiego napięcia baterii, gdy napięcie baterii jest niższe niż około 7,2 V, miga niebieskie światło, co sugeruje wymianę baterii 5 .Funkcja automatycznego wyłączania: jeśli w ciągu ostatnich 10 minut nie zostanie wykonana żadna operacja, urządzenie wyłączy się automatycznie